The Smart Marty Sky Dispatch
NTSB Calls For Improved Retardant Tests After Air Tanker Corrosion Find
The NTSB has called on the U.S. Forest Service to develop more comprehensive corrosion testing procedures for aerial firefighting retardants.
The National Transportation Safety Board (NTSB) has urged the U.S. Forest Service to implement more comprehensive corrosion testing procedures for aerial firefighting retardants, emphasizing how these chemicals interact with aircraft materials and the potential for corrosion over time. The call centers on safety and maintenance considerations for aerial firefighting operations, according to the NTSB’s request.
AeroTime reports that a fire retardant approved for use in U.S. firefighting aircraft led to extensive corrosion during a single fire season, damaging wing structures, control cables, electrical connectors and engines. The findings prompted the NTSB, on November 17, 2026, to call for stronger Forest Service testing requirements, with investigators concluding that the agency’s approval process did not adequately assess how the chemical would affect aircraft under actual operating conditions.
The investigation focused on two firefighting aircraft: a BAe 146-200A operated by Neptune Aviation Services, based in Montana, and an MD-87 operated by Aero Air, which flies firefighting missions as Erickson Aero Tanker and is based in Oregon. Both aircraft participated in a 2023 Forest Service trial examining how the newly approved retardant could be used in conjunction with an existing product. The trial initially used Fortress FR-200, which uses magnesium chloride as its active retardant salt, and later alternated with Phos-Chek MVP-Fx, a phosphate-based retardant manufactured by Perimeter Solutions.
In the MD-87, investigators found that corrosion penetrated more than half the thickness of a wing-spar doubler, a reinforcement that forms part of the wing’s main load-bearing structure. Aero Air reported extensive repairs, including replacement of more than 90 electrical connectors, several control cables and an approximately 44-inch section of a lengthwise structural member in the fuselage. Corrosion was also found in three engines used on the twin-engine aircraft at different times during the trial.
The BAe 146 demonstrated significant corrosion inside its retardant tank, with the trial not requiring tanks to be washed between loads of the different products, allowing residual chemicals to mix. The combined use of magnesium chloride-based and phosphate-based retardants during the season was a key factor investigated in the corrosion outcomes.
Postseason maintenance revealed the extent of the damage, and Forest Service officials notified the NTSB in March 2024, requesting an investigation due to concerns that corrosion could lead to an accident. The NTSB’s investigation and findings prompted a formal call for enhanced testing protocols by the agency.
Aviation Week coverage notes that the NTSB’s request focuses on strengthening testing procedures for how retardants interact with aircraft materials, rather than detailing specific test methods or identifying affected aircraft models beyond those in the examined trial. The material emphasizes safety and maintenance considerations, with additional reporting highlighting the broader policy implications for the Forest Service’s retardant-approval process.