The Smart Marty Sky Dispatch
Akasa Air Boeing 737 MAX strikes tail on runway in Kolkata — AeroTime
An Akasa Air Boeing 737 MAX 8 struck its tail on the runway during a go-around in Kolkata. The aircraft landed safely on a second approach, with no injuries reported.
An Akasa Air Boeing 737 MAX 8 reportedly struck its tail on the runway during a go-around at Netaji Subhas Chandra Bose International Airport in Kolkata. The incident occurred as the aircraft chose to abort its landing and initiate a second approach, after which it completed the landing sequence. No injuries were reported in connection with the event, according to the available material.
The aircraft involved was identified as an Akasa Air 737 MAX 8. The sequence described indicates a go-around operation following a landing attempt, followed by a subsequent landing on a later approach. The exact原因 or contributing factors behind the tail strike are not detailed in the supplied material.
Authorities and emergency response details are not elaborated in the provided sources beyond noting that the incident was managed on the runway and that the aircraft subsequently completed its landing. No information is given about on-site injuries, medical evaluations, or evacuation procedures, if any, related to this event.
The reporting outlets that covered the incident include UA.NEWS, which described the tail strike on the runway during a go-around and the safe completion of a second approach. Simple Flying contributed additional context by noting related aviation regulatory actions affecting another Boeing family, but in connection with the same feed of information, rather than detailing the Kolkata incident itself.
According to Simple Flying, a broader aviation safety development was reported: the Federal Aviation Administration issued an airworthiness directive affecting nearly 2,000 Boeing 737 Next Generation (737NG) aircraft. This directive addresses reports of excessive nose movement associated with the stabilizer mechanism, specifically the hinges and jackscrew that control the horizontal stabilizer. The reporting makes clear that the AD is a regulatory action aimed at inspecting the stabilizer components across the affected fleet, although it does not provide operator names or mention a direct link to the Kolkata event.
The published material clarifies that the FAA directive is separate from the Kolkata tail-strike incident, but is presented as related contextual information within the same reporting cycle. It notes that the scope covers the 737NG fleet and emphasizes improving continued airworthiness, without detailing implementation timelines or inspection procedures within the supplied text.
No further specifics are provided about the Kolkata incident itself, such as the weather conditions at the time, the exact location of the tail strike on the runway, the aircraft’s tail configuration, or the extent of any runway damage. The available material does not mention the flight number, the phase of flight beyond the go-around, or the presence of passengers or crew adjustments following the event.
In summary, the Kolkata incident involved an Akasa Air 737 MAX 8 that struck its tail during a go-around, with a subsequent safe landing on the second approach and no reported injuries in the material provided. Separate reporting from Simple Flying highlights the FAA’s airworthiness directive affecting nearly 2,000 737NG aircraft, addressing stabilizer hinge and jackscrew movement, but does not connect this directive to the Kolkata event beyond supplying broader fleet safety context. No further investigative details or official statements are included in the supplied material.